Marine Store

Easier waste transfer and no clogging as the cutting blades emulsify all waste. Macerator chamber before the impeller for optimal grinding. Silent in operation. Integrated in the ceramic toilet.

Red additional ASU electronic unit for Danfoss BD35F and BD50F 12/24V Compressors For Isotherm Cruise ASU and Grey Line ASU Refrigerators, ASU build-in units type 3201, 3701, 3251SP, 3751SP, 4201 Magnum, 5301 Magnum Twin and 5801 Magnum Twin. Electronit Unit SEG00008DA

Close-coupled self-priming shallow-well pump with built-in ejector. A high-quality pump for domestic water supply. Designed with environmental considerations, featuring a stainless steel casing, brass alloy impeller with minimal use of plastic materials.

Close-coupled self-priming shallow-well pump with built-in ejector. A high-quality pump for domestic water supply. Designed with environmental considerations, featuring a stainless steel casing, brass alloy impeller with minimal use of plastic materials. NGX are used for drawing water out of a well, lifting water containing air or other gases, increasing water pressure from flooded suction applications. They are also used as pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).

Propspeed is the original propeller and running gear coating system, specially formulated to prevent marine growth from bonding to metal surfaces below the water line.

SIDE POWER Joystick Panel Dual Gray 8940G - Sleipner

CALPEDA Pump NGX 4/B/110 380V AISI 316 (Salt Water). Close-coupled self-priming shallow-well pump with built-in ejector. A high-quality pump for domestic water supply. Designed with environmental considerations, featuring a stainless steel casing, brass alloy impeller with minimal use of plastic materials.

Close-coupled self-priming shallow-well pump with built-in ejector. A high-quality pump for domestic water supply. Designed with environmental considerations, featuring a stainless steel casing, brass alloy impeller with minimal use of plastic materials.

Propspeed is the original propeller and running gear coating system, specially formulated to prevent marine growth from bonding to metal surfaces below the water line. large kit.

SBC NRG 250 PLUS Max output current 25 A Charge absorption voltage 14.1 Vdc OL • 14.4 Vdc SL/GEL/AGM • 14.7 Vdc Optima® Charge float voltage 13.4 Vdc OL - 13.6 Vdc AGM - 13.8 Vdc SL/GEL/Optima® Number of outputs 3 Supply voltage 264÷83 Vac con riduzione di potenza sotto 108 Vac Frequency 45 ÷ 66 Hz Efficiency ≥ 85% Max absorption (230/240 Vac) 1.8 A Max absorption (120 Vac) 3.4 A Operating temperature -15°C ÷ +70°C, con riduzione di potenza lineare sopra i + 45°C -4°F ÷ +158°F, with linear power reduction over +122°F Noisiness < 45 dbA @ 1 m Dimensions W x H x D 114 x 252 x 71 mm (4"31/64 x 9"59/64 x 2"51/64) Weight 1,6 Kg (3.5 lb)

Close-coupled centrifugal pumps with open impeller. Bronze version for salt water. Free-flow impeller (vortex or recessed impeller) for type C 16/1E. C: version with pump casing and lanter bracket in cast iron. B-C: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).For moderately dirty liquids or emulsions.

INDEL Slim Water Heater 20Lt - 220V/750W The Isotemp water heater comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. Product Code: 602031S000003

Close-coupled centrifugal pumps with open impeller. Bronze version for salt water. B-C: version with pump casing and lantern bracket in bronze (the pumps are supplied fully painted). 2-pole induction motor, 50 Hz (n ≈ 2900 rpm). CM: single-phase 230 V ± 10%, with thermal protector. Capacitor inside the terminal box. Insulation class F. Protection IP 54. Motor suitable for operation with frequency converter from 1,1 kW.

Close-coupled centrifugal pumps with open impeller. Bronze version for salt water. B-C: version with pump casing and lantern bracket in bronze (the pumps are supplied fully painted). 2-pole induction motor, 50 Hz (n ≈ 2900 rpm). CM: single-phase 230 V ± 10%, with thermal protector. Capacitor inside the terminal box. Insulation class F. Protection IP 54. Motor suitable for operation with frequency converter from 1,1 kW.

604031B000003 - The Isotemp water heater comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater.

Max output current 40 A Charge absorption voltage 14.1 Vdc OL • 14.4 Vdc SL/GEL/AGM • 14.7 Vdc Optima® Charge float voltage 13.4 Vdc OL - 13.6 Vdc AGM - 13.8 Vdc SL/GEL/Optima® Number of outputs 3 Supply voltage 264÷83 Vac con riduzione di potenza sotto 108 Vac Frequency 45 ÷ 66 Hz Efficiency ≥ 87% Max absorption (230/240 Vac) 2.8 A Max absorption (120 Vac) 5.4 A Operating temperature -15°C ÷ +70°C, con riduzione di potenza lineare sopra i + 45°C -4°F ÷ +158°F, with linear power reduction over +122°F Noisiness < 45 dbA @ 1 m Dimensions W x H x D 114 x 276 x 71 mm (4"31/64 x 10"55/64 x 2"51/64) Weight 1,8 Kg (3.53 lb)

607531B000000 - The Isotemp water heater comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater.

NK3 - The Sanisplit NK is an automatic pumping unit which transfers water from the bidet to the collection tank irrespective of gradient so also serves showers and washbasins. The Sanisplit NK has a powerful and silent centrifugal pump. It is controlled by a pressure switch which starts the pump as soon as the water arrives in the unit’s collection tank.

NK3 - The Sanisplit NK is an automatic pumping unit which transfers water from the bidet to the collection tank irrespective of gradient so also serves showers and washbasins. The Sanisplit NK has a powerful and silent centrifugal pump. It is controlled by a pressure switch which starts the pump as soon as the water arrives in the unit’s collection tank.